Home Products Prestressing System anchorage

Conventional anchorage M series

Square stressing anchorage: is used at the stressing end of post-tensioning working. After stressing PC strand through jack, the strand would be fixed well through square stressing anchorage and transfer the strength into concrete through single plane. Square stressing anchorage could be used as fixed end anchorage under unburied deign.

Product Information Product Introduction

CONVENTIONAL ANCHORAGE M SERIES FOR PC STRAND 15.24MM

Unit: mm

Type	Strand 15.24mm	Anchor head		Trumpet			Reinforcement				Type of Jack
Type	Strand 15.24mm	Ф A	B	C	D	фI	фF	G	H	N	Type of Jack
15-1	1	48	48	/	/	/	/	/	/	/	1000
15-2	2	86	50	130	116	63	115	10	50	5	1000
15-3	3	88	50	130	116	63	115	10	50	5	1000
15-4	4	102	50	147	123	63	115	10	50	5	1500
15-5	5	112	50	162	130	77	127	12	50	5	1500
15-6	6	126	52	175	152	80	142	12	50	5	2000
15-7	7	126	53	175	152	80	142	12	50	5	2500
15-8	8	136	55	185	160	90	175	14	50	5	2500
15-9	9	146	55	200	163	90	175	14	50	5	2500
15-10	10	156	58	200	163	95	175	14	50	5	2500
15-11	11	166	58	240	188	100	205	14	50	6	3500
15-12	12	166	60	240	188	100	205	14	50	6	3500
15-13	13	170	63	240	188	100	205	14	50	6	3500
15-14	14	176	65	250	215	110	205	14	50	6	3500
15-15	15	186	68	250	215	110	205	14	60	6	3500/4000
15-16	16	196	70	270	255	110	235	16	60	6	3500/4000
15-17	17	196	73	270	255	110	235	16	60	6	4000
15-18	18	206	75	290	260	114	235	16	60	6	4000/5000
15-19	19	206	75	290	260	114	235	16	60	6	5000
15-20	20	226	80	290	260	124	255	16	60	7	5000
15-21	21	226	80	305	280	124	255	16	60	7	6500
15-22	22	226	80	305	280	124	255	16	60	7	6500
15-24	24	246	83	340	320	124	305	18	60	7	6500
15-27	27	246	85	350	320	124	305	18	60	7	6500
15-31	31	256	95	400	360	130	350	20	70	8	9000
15-37	37	276	100	440	440	140	450	20	70	8	9000
15-43	43	326	110	480	490	160	500	22	80	9	9000
15-51	51	346	120	560	580	160	600	22	80	9	12000

CONVENTIONAL ANCHORAGE M SERIES FOR PC STRAND 12.7MM

Unit: mm

Type	Strand 12.7mm	Anchor head		Trumpet			Reinforcement				Type of Jack
Type	Strand 12.7mm	Ф A	B	C	D	фI	фF	G	H	N	Type of Jack
13-1	1	48	48	/	/	/	/	/	/	/	1000
13-3	3	88	49	130	116	63	115	10	50	5	1000
13-4	4	102	49	147	123	63	115	10	50	5	1000
13-5	5	112	50	162	130	77	127	12	50	5	1000
13-6	6	115	50	165	130	68	142	12	50	5	1000
13-7	7	115	50	165	130	68	142	12	50	5	1500
13-8	8	126	52	175	152	80	175	12	50	5	1500
13-9	9	136	52	185	160	90	175	14	50	5	1500
13-10	10	146	55	200	163	90	175	14	50	5	1500
13-11	11	156	58	216	185	90	205	14	50	6	1500
13-12	12	156	60	216	185	90	205	14	50	6	2500
13-13	13	156	60	216	185	90	205	14	50	6	2500
13-14	14	166	62	240	188	100	205	14	50	6	2500
13-15	15	176	62	240	188	100	205	14	50	6	2500
13-16	16	186	65	250	215	110	235	16	50	6	2500
13-17	17	186	65	250	215	110	235	16	50	6	2500
13-18	18	186	65	250	215	110	235	16	50	6	3500
13-19	19	186	65	250	215	110	235	16	50	6	3500
13-20	20	186	68	250	215	110	235	16	60	7	3500
13-21	21	196	68	270	255	110	235	16	60	7	3500
13-22	22	206	70	290	260	114	235	16	60	7	3500
13-24	24	226	75	305	280	124	255	16	60	7	4000
13-27	27	226	80	305	280	124	255	16	60	7	4000
13-31	31	246	85	350	320	120	255	16	60	7	4000
13-37	37	256	90	360	320	135	305	18	70	8	5000
13-43	43	316	100	390	350	140	350	18	80	8	5000
13-51	51	326	110	460	400	150	400	20	80	8	6500

The stressing anchorage set can be used either at the fixed or stressing end of post-tensioning work. The steel strands through this anchorage set need to be first pulled by the jack and then fixed with the wedges such that the PC strand can be transmitted to the concrete structure via the casting plate. The square anchorage set can also be used as the fixed-end anchorage under unburied design. The circular set have same function as that of square set. The square anchorage set transfers the PC strand into the concrete by the casting plate with a single plane, while the circular anchorage set does so by the casting plate with multiple planes. Another difference between these two types is that the bearing area of circular is smaller than that of square.

Introduction

News

Oline Support

Live support

0987619893

Head office: No.6 Block, Mark Lenin residential quater, Dich Vong Hau ward, Caugiay Dist., Hanoi, Vietnam

Add: No.909, Ellipse Tower, 110 Tran Phu Street, Ha Dong Dist, Ha Noi City

Tel: 024.62977112 Fax: 024.37950767 Email: info@ntcc.com.vn